TXC-4M Extreme Crawler

Clipless Tube-Frame Body

Lightweight tube frame

Replaceable body panels

Accessory panels available (sold separately)

Interior with driver figure

Simple clipless latch in the rear

Bosses for accessory light kits (sold separately)

3s Brushless Electronic Speed Control

Field Oriented Control (FOC)

Delivers precise throttle control

LiPo overvoltage protection

Two-stage low-voltage detection

Fully waterproof for all-weather fun

Three drive profiles

Sport Mode — forward / brake / reverse

Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral

Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake

6-volt BEC

3s Brushless Outrunner Motor

More torque and low speed control than conventional designs

3350 Kv

Laser-etched motor can

Pre-installed pinion gear

2.4 GHz Radio System

TQ Compact 2-channel transmitter

Removable color-matched grip adapter

High-output signal delivers outstanding range

Compact receiver with dual servo and LED channels

Molded Monocoque Chassis

Single piece composite design

More torsional rigidity than conventional ladder frames

Reduces weight

Battery and ESC held low in the chassis

Mounted on opposite sides for better weight distribution

Integrated rock light mounding and wire routing

Driveline

Full-time shaft-driven 4-wheel drive

Locked axles with steel-spool gears

Steel axle shafts and U-joints

25% overdrive front axle

Heavy-duty CV center driveshafts

Single speed transmission

All metal gears

Full ball bearings

Portal Axles

Increases center ground clearance

Reduces torque twist

All metal gears

Full ball bearings

Suspension

Lay-down shock design

Triangulated 4 link front and rear

High-clearance lower links

Steering

Superior 60° steering angle

Waterproof high-torque 2265 servo

Full metal gears

75 oz-in torque

Aluminum center section

Horizonal servo mounting

High-throw metal servo horn

High-clearance drag link

Direct steering (no servo saver)

Oil-Filled Aluminum GTM Pro Shocks

Aluminum bodies in bright anodized colors

Realistic body-over-shock appearance

O-ring sealed with smooth controlled damping

Easily refreshed with available rebuild kits

Wheels and Tires

1.3” Licensed Method Race Wheels®

3-piece Beadlock design

7 mm wheel hex

1.3” x 2.8” Stone Claw™ tires

High-grip rubber compound

Aggressive stepped block tread design

Wide directional sipes

Battery and Charger Included

3 -cell LiPo battery with iD®

11.1 volts

250 mAh capacity

USB-powered charger

iD technology for faster, safer charging

Sealed Ball Bearings

Durable Hex Hardware